How to Properly Inspect and Maintain Your Tank Liner: Expert Tips and Tricks

With climate change and unforeseen weather phenomena, people opt to have their own water tanks at home in order to have their own water source. As consumers, this provides them greater convenience and peace of mind since they now have control over their water supply. However, water tanks without suitable coating and lining may be severed and damaged over time, contaminating the water inside.

Ensuring that your water tank liners and the water tank lining coating of your storage tanks at home are at their best provides many advantages, such as preserving the life of your water tank or any storage tank you have.

Nonetheless, the comfort you enjoy should undoubtedly be preserved for a very long period. How? Naturally, you can prevent corrosion and other harmful elements from having direct access to your water tanks by inspecting and maintaining the tank lining in the best possible shape.

Perform tank inspection and maintenance in just 5 easy ways:

Raven Tanks is very much aware of the need to prevent protracted and expensive shutdowns by performing fast and appropriate maintenance on your tank’s liners. Despite the fact that the suggestions included here are based on years of maintenance and tank life extension experience, the individuals performing the inspection or repair work shall retain primary responsibility for adhering to safe and proper procedures.

Here are tips and tricks from experts on how to properly inspect and maintain your tank liners.

1. Surface inspection
Before evaluating the inside of your tank, you must first inspect the outside of the tank. Inspect to see if it is still firmly attached or if there are no visible problems on the outside. Whichever tank lining you choose, it is critical that it is placed appropriately. No matter what coating you choose, if the application or surface preparation is poor, it will not function as intended and will most likely not perform as expected.

2. Check the gas atmosphere inside the tank before the inspection.
The safety of the individual performing the water tank liner inspections on used equipment must come first. The vessel should have been aired overnight after full neutralization and rinsing. Prior to entry, the tank must be examined to make sure the environment has the right oxygen content and the release of hazardous gases.

3. Disinfecting and cleaning
This is one of the most important aspects of the procedure from the standpoint of tank linings. Before the new lining is applied, it is imperative to ensure there are no traces of dirt, foreign objects, prior coating, or past contents on the interior tank walls. The team will set up inside the tank and blast the interior walls to eliminate all waste as part of the cleaning process.
It is essential to vacuum and clean the tank after blasting completely and before beginning the coating process to eliminate any particles that may have become loose during the procedure.

4. Repairs

In any case, where there are damages in your water tank liners and coatings, it is very important to address them as soon as possible. Be watchful for situations like corrosion, UV damage, and other factors that could result in contamination if not handled properly. If repair is necessary, evaluate the situation first. Keep in mind the following information while making a repair decision:

  • What is the extent of the failure?
  • How much time is needed?
  • Is it possible to make a quick fix?
  • What resources are on hand?
  • Which personnel are on hand?
  • Are water tank liner prices and other additional expenses taken into account?
  • What resources and tools are required to finish the job?

5. Recoat regularly
The interiors of water tanks need to be frequently recoated. Inside the tank, the lining should also be put and periodically replaced because water dripping on the tank walls will eventually cause it to deteriorate. The exteriors of water tanks should also be frequently recoated. A water tank’s paint began to fade and degrade over time due to the sun’s ultraviolet rays beating down on it. Acidic bird droppings will also dissolve the paint, leaving exposed areas that are vulnerable to rust.

Raven Tanks – Australia’s Premier Provider of Quality Tank Lining Services!

If the problem within the water tank liner is beyond your capacity to repair, it is preferable to choose industrial and commercial tank and liner specialists after taking the factors above into account.

If you own a residential, commercial, or industrial tank in the Gold Coast, Wollongong, Geelong, Central Coast, and QLD area and need tank liner specialists, call Raven Tanks today!

We supply, install, and repair concrete water tank liners, potable water tank liners, and fire tank liners to commercial liquid storage systems Australia-wide.
Visit for more details on our water tank lining and recoating services.

Or, call us directly at 1800 770 899.

Our Recent Projects

Our Recent Articles